| |
|
header.jpg
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
menu.gif
|
 |
|
|
AiROCK™ is a coil replacement system;
it is not a complete suspension lift kit.
Currently we offer 4" and 6" AiROCK™
bolt-on kits for Jeep® Wrangler TJs.
As with any coil lift, geometry and driveline
issues that go along with a substantial
lift have to be addressed before or while
installing AiROCK™.
We
highly recommend using the Rubicon Express
Extreme Duty Long Arm lift with the AiROCK™
6" system. A Slip Yoke Eliminator is
also needed to handle the extreme axle travel
that the AiROCK™ systems provide. The
shock absorbers that come with our kits
require bar pin eliminators in the lower
front and upper rear. They also require
front upper shock adaptors, which are made
by JKS Manufacturing and others.
|
|
Most
importantly, the AiROCK™ systems require
an on board air, (OBA) system. There are
many ways to design an OBA system, which
is why we do not include one as part of
the AiROCK™ system. We do sell a separate
OBA system and many fittings and accessories
you may need when piecing together your
own OBA setup.
Below
is a list of additional parts needed for
the AiROCK kits
|
|
|
|
Additional
Parts required |
4"
AiROCK
|
6"
AiROCK
|
|
|
CV
Drive Shaft (rear) |
yes
|
yes
|
|
|
Bar
Pin Eliminators (front) |
yes
|
yes
|
|
|
Bar
Pin Eliminators (rear) |
yes
|
yes
|
|
|
Front
Shock Adaptors |
yes
|
yes
|
|
|
Long
Arm kit |
no
|
yes
|
|
|
Adjustable
Track Bars* |
yes
|
yes
|
| |
Adjustable
upper arms (rear)* |
yes
|
yes
|
|
|
On
Board Air system |
yes
|
yes
|
| |
|
|
|
*
included in Rubicon Express Long Arm kit
|
|
|
|
| |
|
|
|
footer1.gif | | | | | |  | |  |  |  |  |  | |  | | |
AiROCK,
Light Blades, X-Line, V-Line, X-Track, X-Rings, X-Straps, U-Turn,
LiteDOTs, and RockLOX are trademarks of Off Road Only, LLC. |
| | | copyright
1999-2006 Off Road Only, LLC. All rights reserved. |
| |
| | |
|
|
|
